Introducing the New & Improved

FastAlign^® 5110Pro Digital Satellite Meter

Released 11/1/2011

"Fast Align 5110Pro^{^®} is the lowest cost satellite meter on the market, now with

Be ware of look-alike meters on the market! We stand behind our products 100% by offering a 2-year product warranty on all LEXIUM brand of products!

Click Here to see the difference between the older FastAlign^® 5100Pro & the FastAlign^® 5110Pro

Click Here to see the difference between the software of the two meters.

What is QuickRecovery^® Software? Click Here to find out.

The FastAlign^® 5110Pro digital satellite meter is a professional grade satellite meter that allows a professional technician to align any satellite dish, C, Ku, or DSS, with ease, thanks to the QuickSweep Technology exclusively available on LEXIUM meters. Priced affordably low, yet offers all the options needed by a technician to easily and quickly install any satellite dish.

The FastAlign^® 5110Pro allows the user to use the parameters of the hundreds of preprogrammed satellite settings in the FastAlign^® 5110Pro or the user can edit the transponder, symbol rate, polarity, and LNBF LO frequency all on one screen & directly from the oversized keyboard of the meter or with the new and improved PC software with the built in QuickRecovery^® software.

Improvements over the older FastAlign^® 5100Pro:
The new & improved FastAlign^® 5110Pro has a few major differences than the previous model.

1. One of the most useful and obvious improvement is 3-digit azimuth reading. Now, you can be anywhere in the world and you can easily find the azimuth, elevation, and polarization of your targeted satellite. Just type in your latitude and longitude and the meter will automatically calculate your satellite dish settings for you.

2. A brand new screen that will give you a much better visibility in direct sunlight.

3. New and improved power circuitry draws less power from the battery while the meter is on stand-by (off). This gives you longer battery life than the older model, or the fake LEXIUM meters you may have seen being produced.

4. There are some changes that are made to the PC software of the new model. Click Here to see the software improvements.

This instructional vide is brought to you courtesy of
Ideal Satellite Services

The satellite meter also features backlight to allow the satellite installer to install in the dark. The screen is divided to 5 section.

The top section provides the Azimuth, Elevation, and LNBF Polarization of the desired satellite.

The left middle section provides the location of the desired satellite, the transponder frequency, symbol rate, LNBF LO frequency, LNBF polarization ( 13=V / 18=H ), and 22KHz power.

The right middle section provides signal information such as signal level, signal quality, strength, and signal noise. If there is no "S" reading, there is no connection between the LNBF and the meter.

The left bottom section provides the databank of the pre-programmed satellite parameter.

The left bottom section provides the users Latitude, Longitude, and and meter information.